Home · Tools · Peptide Calculator
Peptide Calculator

Peptide Calculator

Vial and dose math, with the evidence and limits plainly stated.

This peptide calculator does the reconstitution math for you. You enter how much peptide is in the vial, how much bacteriostatic water you add (or the volume, if it already comes in solution), the size of your U-100 insulin syringe and the dose you were given, and it returns three numbers: the concentration of the mixed vial, the volume of each dose in milliliters and the mark to draw to on the syringe.

The formula is simple. Concentration is the amount of peptide divided by the volume of liquid. The volume of a dose is the dose divided by that concentration, and on a U-100 syringe, units are milliliters times 100. Say you add 2 mL of bacteriostatic water to a 5 mg vial. Since 5 mg is 5,000 mcg, the concentration is 2,500 mcg per mL, so a 250 mcg dose is 0.1 mL, which is the 10-unit mark.

The tool is clear about its limits. It treats the liquid you enter as the final volume, so powder displacement, overfill and wastage aren't modeled, and you should follow the preparation instructions for your product. It calculates quantities; it doesn't choose a treatment or a dose, which is why it asks you to confirm your dose and its units first. A slip between milligrams and micrograms puts the answer off by a factor of 1,000, so check every unit.

Below the calculator, the library covers 17 peptides, from FDA-approved medicines to compounds studied only in cells and animals, sorted by the kind of evidence behind each one, because a study is not a recommendation. Each page gives the regulatory status, any documented dose with its source and the caution that matters most.

Your vial & syringe

Use the amounts on your own label. This tool calculates quantities; it does not select a treatment or dose.

FDA-approved drug — specific formulations and indications Evidence and cautions

FDA approved for a specific HIV-associated lipodystrophy indication and formulation. Source

Labeled 11.6 mg vial with 1.3 mL supplied water; final concentration 8 mg/mL; 7 labeled doses. Preset source

Documented: 1.28 mg · Subcutaneous — only the 11.6 mg vial formulation · Once daily Dose source

The labeled tesamorelin formulation has a specific final concentration that differs from simple vial mass divided by water added. The matching preset uses the label’s final concentration and usable supply. Other entries cannot substitute for this formulation. Read the label.

Math assumes the entered liquid volume is the final solution volume; powder displacement, overfill and wastage are not modeled. Follow product-specific preparation instructions.

Which peptides have been studied?

Explore by goal. Ordered by evidence type, not by expected benefit. A study is not a recommendation; check the population, route and limitations.

17 entries in this selection

Selank

Human research — investigational use

Research-only / investigational — not FDA approved

Anxiety symptoms in a comparative clinical study; this does not establish cognitive enhancement or an injection regimen. Study / source

Read evidence and cautions →

Semax

Human research — investigational use

Research-only / investigational — not FDA approved

Neurological recovery after ischemic stroke in a comparative study, not cognitive enhancement in healthy people. Study / source

Read evidence and cautions →

TB-500

Insufficient evidence for this compound

Research-only / investigational — not FDA approved

FDA reports no identified human exposure data for this fragment; results for full-length thymosin beta-4 cannot be assumed to apply. Study / source

Read evidence and cautions →

Typical dosages

Educational reference. The first cards are Dr. Axe’s own doses; the peptides from his book Heal Your Cells show published practitioner or label doses, named on each card. These examples do not select a treatment or dose for you. Check the route, formulation and instructions with your prescriber or pharmacist.

BPC-157

Common dose: 250–1,000 mcg daily, 5 days a week.

Typical cycle: 6 weeks on / 6 weeks off.

Source: Dr. Axe’s September 24, 2026 review feedback.

Evidence and cautions →

TB-500

Common dose: 2.5–5 mg weekly.

Typical cycle: 4 to 8 weeks.

Source: Dr. Axe’s September 24, 2026 review feedback.

Evidence and cautions →

GHK-Cu

Common dose: 2 mg daily.

Typical cycle: 4 to 6 weeks.

Source: Dr. Axe’s September 24, 2026 review feedback.

Evidence and cautions →

CJC-1295 / ipamorelin

Common dose: 100 mcg of each, nightly.

Typical cycle: 5 days on / 2 days off.

Source: Dr. Axe’s September 24, 2026 review feedback.

Evidence and cautions →

Semaglutide

Daily protein target: Not set. Cellular Bloodwork Analysis →

Protein & resistance training: Include regular resistance training suited to your ability, alongside adequate protein, to help protect muscle while weight comes off.

Starting-dose comparison: 0.025–0.05 mg — 10–20% of the 0.25 mg labeled starting dose.

Adult weight reduction · subcutaneous injection · once weekly. Labeled starting period: Weeks 1–4 · starting dose.

Typical cycle: No micro-dose on/off cycle is specified in Dr. Axe’s material.

Dr. Axe’s educational position is to explore 10–20% of the standard labeled dose. This is arithmetic, not an FDA-labeled regimen or a proven equivalent treatment. This tool does not tell you to cut or change your prescription.

Existing labeled-dose source · Dose comparison and cautions →

Tirzepatide

Daily protein target: Not set. Cellular Bloodwork Analysis →

Protein & resistance training: Include regular resistance training suited to your ability, alongside adequate protein, to help protect muscle while weight comes off.

Starting-dose comparison: 0.25–0.5 mg — 10–20% of the 2.5 mg labeled starting dose.

Adult weight reduction · subcutaneous injection · once weekly. Labeled starting period: First 4 weeks · starting dose, not maintenance.

Typical cycle: No micro-dose on/off cycle is specified in Dr. Axe’s material.

Dr. Axe’s educational position is to explore 10–20% of the standard labeled dose. This is arithmetic, not an FDA-labeled regimen or a proven equivalent treatment. This tool does not tell you to cut or change your prescription.

Existing labeled-dose source · Dose comparison and cautions →

SS-31 (elamipretide)

Common dose: 2–5 mg daily by injection in functional-medicine protocols. The FDA-labeled dose for Barth syndrome is 40 mg daily.

Typical cycle: 8 to 12 weeks on / 4 weeks off.

Source: Iman Bar, MD · Forzinity prescribing information

Tesamorelin

Common dose: 1 mg under the skin at bedtime, 5 days on / 2 days off, in functional-medicine protocols. The FDA-labeled dose is 1.28 mg daily (Egrifta WR).

Typical cycle: 3 months on / 2 months off.

Caution: Not for active cancer, pregnancy or hypothalamic-pituitary disorders. IGF-1 and blood sugar need monitoring.

Source: Perfect B clinic protocol · Egrifta WR prescribing information

Evidence and cautions →

Frequently asked questions

How much bacteriostatic water should I add to a peptide vial?

Use the volume your product's preparation instructions give. The amount of water sets the concentration, so less water makes a stronger solution and more water makes a weaker one, and the examples here only show the math. For a 5 mg vial, 1 mL gives 5,000 mcg per mL (50 mcg per unit), 2 mL gives 2,500 mcg per mL (25 mcg per unit) and 2.5 mL gives 2,000 mcg per mL (20 mcg per unit).

How do you convert mg to mcg?

Multiply milligrams by 1,000 to get micrograms, and divide micrograms by 1,000 to go back. So 5 mg is 5,000 mcg, 0.25 mg is 250 mcg and 2,500 mcg is 2.5 mg. The calculator accepts either unit for the vial and the dose, but a slip between them changes the result by a factor of 1,000, which is why the tool asks you to confirm your dose and its units before it shows a result.

How many units is 250 mcg on an insulin syringe?

It depends on the concentration of your vial. At 2,500 mcg per mL (5 mg mixed with 2 mL of water), 250 mcg is 0.1 mL, or 10 units on a U-100 syringe. At 5,000 mcg per mL (5 mg with 1 mL), the same dose is 0.05 mL, or 5 units, and at 1,000 mcg per mL (5 mg with 5 mL), it's 0.25 mL, or 25 units. The calculator works this out for whatever you enter.

Which U-100 syringe size should I use?

Pick a syringe whose markings fit your dose volume; the 0.3 mL and 0.5 mL sizes on the calculator have half-unit marks. The calculator offers three U-100 insulin syringes: 0.3 mL (30 units, half-unit marks), 0.5 mL (50 units, half-unit marks) and 1 mL (100 units, whole-unit marks). A 10-unit dose reads easily on the 0.3 mL size, a 40-unit dose needs at least the 0.5 mL size, and anything over 50 units needs the 1 mL syringe.

Does the calculator account for powder volume or overfill?

No, the calculator assumes the liquid volume you enter is the final volume of the solution, so it doesn't model powder displacement, manufacturer overfill or the small amount lost in the syringe and needle. That keeps the math simple and easy to check by hand. When your product comes with its own preparation instructions, follow those instructions, and enter the final volume they produce if it's stated.

Is the peptide calculator a dosing recommendation?

No, the calculator converts a dose you already have into a volume and a syringe mark. It doesn't select a treatment or a dose, and it asks you to confirm your dose and its units before it calculates. The dose cards in the library show what an FDA label, a published practitioner source or Dr. Axe's own approach describes, each with its source, and they're there to educate rather than to prescribe.

Need help interpreting this information? Explore care at The Health Institute.